FT8® MOBILEPAC®

Aero-derivative Gas Turbine

Power generation within one day from arrival at the site (pre-commissioned and site-ready.)
When soil-bearing capacity is excellent

No foundation required
Integrated housing for the GT and generator

No site alignment required
Operation at 50 Hz or 60 Hz [Remove the arrows]

Dual Frequency

FT8^® MOBILEPAC^®Gas Turbine Package

The FT8^®MOBILEPAC^® gas turbine package requires a small footprint utilizing an 80-by-54-foot area in parallel configuration. The aero-derivative FT8 MOBILEPAC package design is fast to deliver, install, and produce power, and the ideal solution for peaking or grid-firming applications.

Very little advanced site preparation is required, and no foundation or concrete pad is necessary for installation of the unit. The unit is transportable by land, sea, or air and modularly packaged for quick, worldwide delivery and installation.

Features
Specifications
Arrangement
Solution
Delivery Record

Features

A new MOBILEPAC^® gas turbine package can be assembled and generating power within a few weeks of arrival at a site.
The standard package can easily be reconfigured to operate at either 50 Hz or 60 Hz.
The trailers run on public roads for prompt use as an emergency power source.
The major components are packaged into two trailers to enable complete installation for emergency power generation within one day (pre-commissioned and site-ready units.)
Compact enough for air transport to minimize delivery time (in addition to land and ocean transport).
The advanced package design eliminates the need for concrete foundations, thereby reducing the cost and time required to complete installation.

Specifications

Output	60 Hz/50 Hz:31 MW/29 MW(Dual Frequency)
Fuel	Dual Fuel (Gas/Oil)
Start-up Time	10 minutes (cold start to full power)
Type of Trailer	Mobile
Trailer Installation	Flexible Trailer Siting
Number of Trailers	2
Cooling Method	Air Cooling
Type of Generator/ Voltage of SWGR	Open-ventilated Air Cooling/ 15 kV
NOx Control	Water Injection
Starting Method	Hydraulic
Type of Ignition	Electric Spark
Turning	Unnecessary
Reduction Gear	Unnecessary

Configuration

		50 Hz	60 Hz
Compressor		Axial, multi-stage
Combustor		Cannular
Turbine		Axial, multi-stage
Rotor		Build-up
Output		Free
Speed	rpm	3,000	3,600
Gas Turbine	Dimension	5m×2m×3m
Gas Turbine	Weight	13t

Performance

		50 Hz	60 Hz
ISO Base Rating	kW	28,528	30,941
Efficiency	%	34.7	36.7
LHV Heat Rate	kJ/kWh	10,376	9,825
LHV Heat Rate	Btu/kWh	9,834	9,312
Exhaust Flow	kg/s	92	92
Exhaust Temp.	℃	496	491
Exhaust Temp.	F	924	916
Start-up Time	Minutes	10 (cold start to full power)	10 (cold start to full power)

Arrangements

Output	60 Hz/50 Hz:31 MW/29 MW (Dual Frequency)
Fuel	Dual Fuel (Gas/Oil)
Type of Trailers	Power and Control; in-line or parallel configuration
Cooling Method	Air Cooling

In-line Configuration

Solution

In addition to using the MOBILEPAC^® unit (movable, dual-frequency power station) as an emergency power source for disasters and big events, we propose that customers make the most of the features of the MOBILEPAC^® unit as a temporary power source for operation during the construction of large power plants.

If surplus power is to be transmitted in addition to the power source for construction work, the MOBILEPAC® unit is very useful in countries with tight electricity supplies.
The trailers can run on public roads The MOBILEPAC^® unit is easy to disassemble, and can be moved easily to the next construction site and reassembled once a power plant is completed. This portability cuts the cost of using a temporary power supply facility.
The MOBILEPAC^® unit also can provide a power source during periodic inspections.