Connector for Backplane

This is the lineup of DIASYS Netmation / DIASYS Netmation4S backplane connectors.
Check the PDF file for details.

Name Overview
Backplane
Connector
LSACT01 (175 KB) Screw Type, 0.2 - 2.5mm2
Lock & Release latch, 18pins
LSACT02 (187 KB) Screw Type, 0.2 - 2.5mm2 Screw latch, 18pins
LSACT03 (184 KB) Spring Type (Push IN), 0.2 - 2.5mm2
Lock & Release latch, 18pins
LSACT04 (189 KB) Spring Type (Push IN), 0.2 - 2.5mm2
Screw latch, 18pins
LSACT05 (193 KB) Spring Type (Push IN), 0.2 - 2.5mm2
Lock & Release latch, 18pins
LSACT06 (189 KB) Spring Type (Push IN), 0.2 - 2.5mm2
Screw latch, 18pins
LSACT07 (186 KB) Screw Type, 0.2 - 1.5mm2
Lock & Release latch, 18pins
LSACT08 (182 KB) Screw Type, 0.2 - 1.5mm2
Screw latch, 18pins
LSACT09 (229 KB) Screw Type, 0.25 - 2.5mm2
Screw latch, single disconnection type, 16pins
LSACT10 (248 KB) Screw Type, 0.25 - 2.5mm2
Screw latch, 32pins
LSACT11 (234 KB) Connector Type, D-sub, Screw latch
Dsub Connector Type, 37pins
LSACT12 (232 KB) Screw Type, 0.25 - 2.5mm2
Screw latch, both disconnection type, 16pins
LSACT13 (230 KB) Screw Type, 0.3 - 2.0mm2
Screw latch, ring terminal type, 17pins
LSACT13B (234 KB) Screw Type, 0.3 - 2.0mm2
Screw latch, ring terminal screw-up type
17pins, (AI/AO/DO:8ch, DI/DO:16ch)
LSACT15 (239 KB) Screw Type, 0.25 - 2.5mm2
Screw latch, 32pins type
32pins with RTD (Between 15 to 16pin)
LSACT16 (216 KB) Screw Type, 0.25 - 2.5mm2
Screw latch, 16pins type
16pins with RTD (Between 15 to 16pin)
LSACT17A (239 KB) Screw Type, 0.3 - 2.0mm2
Screw latch, ring terminal type
17pins, (8ch minus common)

LSACT17B (240 KB)
Screw Type, 0.3 - 2.0mm2
Screw latch, ring terminal screw-up type
17pins, (8ch minus common)
LSACT18A (227 KB) Screw type, 0.3 - 2.0mm2
Screw latch, Ring Terminal type,
17pins, RTD1 point in-built (between15 to 16pins)
LSACT18B (225 KB) Screw type, 0.3 - 2.0mm2
Screw latch, Ring Terminal
Screw-Up type,17pins, RTD1 point in-built (between15 to 16pin)
LSACT19 (230 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 36pins type
LSACT20 (254 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 36pin type, DI Dual parallel input-only
LSACT20A (247 KB) Screw type, 0.2 - 1.5mm2
Screw latch, 36pin type, DI Dual parallel input-only
LSACT21 (245 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 18pin 8point fuse type One disconnection type
LSACT22 (246 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 18pin type Thermocouple input-only (7points)
LSACT23 (231 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 18pin type 3 wire RTD input (4) only
LSACT23A (232 KB) Screw type, 0.2 - 2.5mm2
Screw latch, 18pin type 3 wire RTD input (4) only
LSACT24 (184 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 18pins type
LSACT31 (267 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 36pins type, DO redundancy
LSACT32 (272 KB) Spring type (Push IN), 0.25 - 2.5mm2
Screw latch, 36pins type, DO redundancy, 8point common
LSACT33 (273 KB) Spring type (Push IN), 0.25 to 2.5 mm2,
Screw latch, 18 pins type, with 200 Ω resistor, for analog input(8 points)
LSACT34 (619 KB) Screw type, 0.2 to 2.5 mm2,
Lock & Release latch, 18 pins, with 200 Ω resistor, for analog input(8 points)
LSACT35 (242 KB) Screw type, 0.3 to 2.0 mm2,
Screw latch, Ring Terminal screw-up type, 17 pins, with 200 Ω resistor, for analog input(8 points)
Compliant accessory connector list (232 KB) Accessory connector compliance table